While drywall repair and installation is generally a DIY project, there are some common problems that require professional help. The most common issues include nail pops, leaking pipes, and water damage. Water damage can be expensive, but can be remedied easily with a new pipe or replacement of a roof or gutter.

Drywall repair is similar to other types of home renovations, and the process is often the same. The repair process uses spackle and joint compound to patch up small holes. For larger holes, patching is often combined with sanding the excess compound. There are also several different solutions for repairing drywall.

Drywall repair is a crucial part of many home renovation projects, as it completes the look of rooms and creates a polished look. Fortunately, a professional company like St. Petersburg Handyman can provide top-notch service for drywall installation and repair. The company has extensive experience in home renovations.

Homeowners can save money by hiring a professional to repair drywall holes. For a reasonable price, a handyman or contractor can repair a hole up to seven inches in diameter. Materials for such a job can be purchased at a big box home improvement store. Screws cost about $6 a pound, a roll of 250-foot self-adhesive mesh tape costs $10, and a bucket of joint compound costs around $15. Professional painters can charge between $70 and $130 an hour for small repairs, and may even charge a flat fee for the job.

Drywall repair and installation can also be an excellent option if you have a small hole or a small ding. While you can patch small holes with putty and sandpaper, bigger holes and dents require professional help. When repairing a hole, you should always plan on a significant amount of dust.

Drywall repairs may require cutting out a section of drywall and adding furring strips. However, be careful not to cut into a wall stud because it could come in contact with pipes and wires. If you’ve cut a nail pop, it’s easy to locate a stud by leveling the wall vertically and marking it with a pencil. You can also use a stud finder to find studs.

If you find a hole that is four inches or larger, you’ll need to replace the entire drywall. Before you begin patching, be sure to locate all wires and utilities. Make sure to use a stud finder to locate wall studs, since these are where most wires are attached. Also, use a carpenter’s square to mark studs on either side of the hole.

Cracks and dents are best repaired with joint compound, but if the crack is more than half an inch, it may require reinforcing mesh before applying joint compound.